Block mode Scroll

How to launch the Scroll module to rack up transaction numbers and volume on the Scroll network.

Select "Block mode" in the "Mode" section.
Select one of the three run mode options in "Run Mode".
There are four modes for Block Mode: Preset Block, Dmail, Deploy Contracts, Merkly NFT Mint & Bridge, and NFTs2me.

1 - Preset Blocks mode allows you to launch the module with selected script blocks, one of which will be randomly selected for reaching the required number of transactions for your wallets. This mode includes swaps/adding liquidity/lending/NFT mints/domain mints.

2 - DMAIL mode allows you to launch the module and do transactions through the DMAIL service with lower transaction fees (to increase their number or to maintain activity on a wallet), as well as to farm points for the future retrodrop from DMAIL itself.

3 - NFTs2me mode allows you to mint NFTs with NFTs2me.

4 - Deploy Contracts mode allows you to deploy contracts on Scroll. You have the opportunity to create a contract and be eligible for one of three NFTs from Scroll until December 10. Find out more here.

5 - Merkly NFT Mint & Bridge mode allows you to mint oNFTs and bridge them to your network of choice.

Preset Blocks

You can select the protocols you want to work within the "Select blocks" section.
In the "Select Presets by Risk" subsection, you can select protocols with good liquidity and low-liquidity pairs/protocols. We recommend using low-liquidity ones with amounts up to $5 because they have large Slippage and Price Impact, which can lead to near-total loss of funds during the exchange. So choose this option only if you understand what you are doing. The low-liquidity protocols section is for those who want the maximum number of unique contracts. Use this strictly at your own risk.

Click "Select".

You can select all the protocols listed by clicking "Select all".
To select individual protocols, check the checkboxes in front of whatever token pair you need.
You can see what the module does for each block in more detail by clicking on question mark icons next to each block.

To select all blocks in a given protocol, click "Select all" in that protocol's window.

If you select all the actions that are currently available in the application, then the module will interact with any selected script blocks from the list, but it won't necessarily affect all protocols in one session. This will depend on the number of transactions you set for this wallet (since each block scenario contains from 2 to 8 transactions).

To use a settings preset, click on the "Select preset" field and select a preset.

The delays between actions are set up in the "Delays" section. It features two modes: Standard and Pro.
There are three settings in the Standard mode: Wallet - a delay between launching wallets; Block - a delay between script blocks (protocols); Step - a delay between actions in the script block.

The Pro mode lets you specify three additional settings:

Approve - delay between approval and swapping/adding liquidity;
Break - delay between half steps in one script block.;
Gas guard - when this delay is active, the wallet will go to sleep if several accounts in one session are ready to work once the set gas threshold has been reached. This was done to prevent all those wallets from starting transactions after reaching the set gas threshold.

In the "Max gas price" section you set the gas limit on Ethereum for the transactions. The app will wait until the gas price falls to the set limit.

If the gas price has gone up during a session and you want to raise the gas limit, you can do so in Logs & Progress by going into the "Sessions" subsection.

In the "Amount of transactions" section, enter the amount of transactions that should be done on EVERY wallet within a session, in a range

In the "Work Amount Range" section, enter the percentage range of the amount that will be used in the session for the operation of EACH of the selected wallets. That is, if you have 1 $ETH on your wallet balance and you set 40-50%, then the app will work with a range of 0.4-0.5 $ETH. This rule will apply to all wallets that are selected within this session, and this percentage will be randomly selected before each next script block is launched.

If you want to randomize the order in which your wallets launch, leave the "Randomize wallets?" checkbox ticked.
If the "Approve INFINITE amounts?" checkbox is checked, then you will have an infinite number of tokens approved, so that you do not need to approve your tokens before each swap/liquidity addition. If the checkbox is disabled, only the amount needed to complete the transaction will be approved. Note that you can't change the amount of tokens to be approved through Argent/Bravos wallets manually, this can be done through the blockchain only. You have to choose whether to save money on subsequent approvals with this feature but risk being exposed for this, or toggle this checkbox and save on gas on subsequent transactions with this token.

To save current delay settings as a preset for subsequent sessions, click "Save this as preset".

To initiate a session, click "Launch".

Done. Now you can read the logs on this session in the "Logs & Progress" section.

DMAIL

This mode has two variants: Full Touch and Spam TXs.

Full touch:

The Full Touch mode allows you to send custom emails to custom email addresses. What's great about this mode is that the emails are sent through the DMAIL's own UX/UI, which allows you to farm points and participate in their future retrodrop.

The Full Touch mode allows you to send custom emails to custom email addresses. To start configuring, click "Open custom Dmail settings".

Enter the recipient addresses in the "Recipient" field. The addresses can be entered manually or generated randomly for all wallets by clicking "Random recipient email".

Enter the subject of the email in the "Subject" field. Clicking "Random email subject" generates random subjects.

Enter the email body in the "Text" field. Clicking "Random email text" generates a random text for the email body.

The "Actions" section allows you to refresh each wallet's information separately. Click on the refresh icon and all fields will be filled in automatically.

To use a settings preset, click on the "Select preset" field and select a preset.

Set the delay between wallet launches.

Clicking Pro will unlock the Gas guard setting. When this delay is active, the wallet will go to sleep if several accounts in one session are ready to work once the set gas threshold has been reached. This was done to prevent all those wallets from starting transactions after reaching the set gas threshold.

The app can also mint a random domain on Dmail with 8+ symbols for each wallet. It can only be minted once. The domain mint is free.
To mint domains for each wallet, click "Mint and Bind domain if not exists".

Set the max Gwei price in the "Max gas price (GWEI) ETH" field.

If the gas price has gone up during a session and you want to raise the gas limit, you can do so in "Logs & Progress" by going into the "Sessions" subsection.

If you want to randomize the order in which your wallets launch, leave the "Randomize wallets?" checkbox checked.

To save current delay settings as a preset for subsequent sessions, click "Save this as preset".

To initiate a session, click "Launch".

Done. Now you can read the logs on this session in the "Logs & Progress" section.

Spam TXs

This mode allows you to "spam" random email addresses with emails with random content. This mode doesn't support farming points on Dmail, but it allows you to launch the app to rack up numerous transactions through Dmail.

Set the delay between wallet launches in the "Wallet" field.

Set the delay between transactions in the "TXs" field.

Clicking Pro will unlock the Gas guard setting. When this delay is active, the wallet will go into sleep if several accounts in one session are ready to work once the set gas threshold has been reached. This was done to prevent all those wallets from starting transactions after reaching the set gas threshold.

Set the amount of emails sent per wallet in the "Amount of transactions" field.

Set the max Gwei price in the "Max gas price (GWEI) ETH" field.

If the gas price has gone up during a session and you want to raise the gas limit, you can do so in "Logs & Progress" by going into the "Sessions" subsection.

If you want to randomize the order in which your wallets launch, leave the "Randomize wallets?" checkbox checked.

To initiate a session, click "Launch".

Done. Now you can read the logs on this session in the "Logs & Progress" section.

NFTs2me

With NFTs2me you can mint NFTs by simply pasting collection contracts on NFTs2me.

You can copy a collection's contract by going into the collection and clicking on the explorer icon.

The contract of the collection is displayed here.

Copy the contract and go to Combine.
Click "Add or Edit Contracts".

Paste the copied contract address into the "Contract address" field.
Click "Add To List".

Once added, the contract will be in a "Contract list". This is a kind of “box” for all the contracts you have previously selected to be stored, which will be launched when the session starts.

To delete a contract, click on the bin icon opposite the address.

To delete all contracts, click "Delete All".

Close the window and proceed to configure the session.
To use a settings preset, click on the "Select preset" field and select a preset.

The "Delays" section sets delays between actions. Wallet is the delay between wallet launches and Mint is the delay between mints on one wallet.

Clicking Pro will unlock the Gas guard setting. When this delay is active, the wallet will go into sleep if several accounts in one session are ready to work once the set gas threshold has been reached. This was done to prevent all those wallets from starting transactions after reaching the set gas threshold.

In the "Max gas price" section you set the gas limit on Ethereum for the transactions. The app will wait until the gas price falls to the set limit.

If the gas price has gone up during a session and you want to raise the gas limit, you can do so in "Logs & Progress" by going into the "Sessions" subsection.

Set the range of the count of NFTs you need to mint per wallet in the "Mint count range" field.

If you want to randomize the order in which your wallets launch, leave the "Randomize wallets?" checkbox checked.
Check the "Allow duplicate minting of the same NFT on the same wallet" checkbox to let the script mint the same NFTs on the same wallets to reach the amount of transactions you specified in the "Mint count range" section. If it's off, the module will not duplicate NFT mints on wallets.

To save current delay settings as a preset for subsequent sessions, click "Save this as preset".

To initiate a session, click "Launch".

Done. Now you can read the logs on this session in the "Logs & Progress" section.

Deploy Contracts

The Deploy Contracts mode allows you to create contracts on Scroll. You can create a contract and be eligible for one of three NFTs from Scroll until December 10. Find out more here.

You can choose between two ways of creating a contract:
+ creating a custom contract with random functions
+ and deploying a contract with Merkly
With the "Cheap contract" mode you can create a contract for about half the price of doing so on Merkly. All contracts are created uniquely, with random functions and names. Select "Cheap contract".

To use a settings preset, click on the "Select preset" field and select a preset.

The "Delays" section sets delays between actions. Wallet is the delay between wallet launches.

Clicking Pro will unlock the Gas guard setting. When this delay is active, the wallet will go to sleep if several accounts in one session are ready to work once the set gas threshold has been reached. This was done to prevent all those wallets from starting transactions after reaching the set gas threshold.

In the "Max gas price" section you set the gas limit on Ethereum for the transactions. The app will wait until the gas price falls to the set limit.

If the gas price has gone up during a session and you want to raise the gas limit, you can do so in "Logs & Progress" by going into the "Sessions" subsection.

If you want to randomize the order in which your wallets launch, leave the "Randomize wallets?" checkbox checked.

To save current delay settings as a preset for subsequent sessions, click "Save this as preset".

To initiate a session, click "Launch".

Done. Now you can read the logs on this session in the "Logs & Progress" section.

Merkly NFT Mint & Bridge

The Merkly NFT Mint & Bridge mode allows you to mint NFTs with Merkly and bridge them to other networks. The mints take place on Scroll and you can bridge NFTs to any of the following networks: Arbitrum, BSC, Avalanche, Polygon, Ethereum, Optimism, and Base.

Select the network to bridge an NFT after minting.

The "Delays" section sets delays between actions. Wallet is the delay between wallet launches.

Clicking Pro will unlock the Gas guard setting. When this delay is active, the wallet will go into sleep if several accounts in one session are ready to work once the set gas threshold has been reached. This was done to prevent all those wallets from starting transactions after reaching the set gas threshold.

In the "Max gas price" section you set the gas limit on Ethereum for the transactions. The app will wait until the gas price falls to the set limit.

If the gas price has gone up during a session and you want to raise the gas limit, you can do so in "Logs & Progress" by going into the "Sessions" subsection.